
4-1-2" Flush Cleat
PRE56530
- Low stock - 4 items left
- Inventory on the way
This beautiful flush mount cleat is very popular on newer boats and is an easy upgrade because it only needs 2 mounting holes (if you can get to the backing nuts). It is cast 316 Stainless Steel, has a very bright polished surface, and fits very flush into its base (only 1/2" tall when closed)... no more toe grabbers! It is easy to grip to lift, just push down to recess. The narrow design (many pull-up cleats are much wider) helps it fit in tight spaces. Installation is easy with two stainless nuts, washers, and lock washers (included).

Dimensions:
A - Overall length of base - 5-5/16"
B - Length of cleat top - 4-3/8"
B - Length of cleat top - 4-3/8"
C - Overall width of base - 1-1/2"
D - Minimum Deck thickness - 5/16"
E - Overall stud length - 2-9/16"
F - Studs are 1-13/16" center to center
Mounting holes - 1-1/8" to 1-1/4" diameter
F - Studs are 1-13/16" center to center
Mounting holes - 1-1/8" to 1-1/4" diameter
Need a larger flush cleat? Check out PRE56531