Stainless steel surface mount scupper with rubber flapper, adhesive mount
Stainless steel surface mount scupper with rubber flapper, adhesive mount
Stainless steel surface mount scupper with rubber flapper, adhesive mount

Stainless steel surface mount scupper with rubber flapper, adhesive mount

Seaw 1015

Regular price$19.99
/
Shipping calculated at checkout.

  • Low stock - 9 items left
  • Inventory on the way

Beautiful polished stainless trim ring and black neoprene flapper enhance the looks of your boat keep your feet dry.  No mounting screws gives it an even cleaner, sleeker look!  It is a direct replacement scupper for most boats that currently have the standard round plastic frame scupper with a neoprene flapper.

Highly polished 316 stainless steel trim ring holds a 1-1/2" neoprene flapper and comes in one piece with the 3M VHB adhesive mounted on the back.  3M VHB tape must be mounted on a clean flat surface. Acceptable surfaces include epoxy paint, gelcoat, and aluminum.

It has a 1.5” thru hole which is larger than the common plastic frame version which have a 1.375” thru hole. This means ours will fit over standard flared brass drain tubes (usually a 1.5” flare).  The neoprene flapper is flexible enough to let water out with little pressure and close completely to keep water out.

This scupper is welded into one piece and comes with the 3M VHB adhesive mounted on the back.  3M VHB tape must be mounted on a clean flat surface. Acceptable surfaces include epoxy paint, gelcoat, and aluminum.

Dimensions:
Flange outside diameter - 2.85"
Flange insdie diameter - 1.5"

Transom mount only.  Scuppers must be mounted above the waterline or paired with a drainage system that is above the waterline.


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


Recently viewed