Polished-brushed stainless push to lock Seaworld latch
PRE17788PB
- In stock, ready to ship
This metal push to lock latch has been used by many boat and RV builders for many years! The plastic body has the word "SEAWORLD" on it and may be tan, beige, or white. If yours fits these dimensions and looks like the ones pictured, this is the replacement!
When the knob is out, it serves as a handle to open & close the cabinet or drawer. It locks closed when the knob is pushed in. The knob and trim ring are solid cast 304 stainless steel. The knob has a satin brushed finish and the trim ring is brightly polished. Looks great in any interior. Fits doors 5/8" to 7/8" thick, the trim ring and guide on the case require a 1" diameter hole. Mounts with 2 #6 screws (not included)
This latch does not include the strike. If you are replacing an old latch, the existing strike will work. If you need the #PRE17780-11 90 degree stainless strike, Click Here.
A - 1-9/16"
B - 2-15/32"
C - 1-9/16"
D - 1/4"
E - 2-3/64" mounting holes on center
F - 25/32"
G - 3/16"
H - 1" mounting hole
When the knob is out, it serves as a handle to open & close the cabinet or drawer. It locks closed when the knob is pushed in. The knob and trim ring are solid cast 304 stainless steel. The knob has a satin brushed finish and the trim ring is brightly polished. Looks great in any interior. Fits doors 5/8" to 7/8" thick, the trim ring and guide on the case require a 1" diameter hole. Mounts with 2 #6 screws (not included)
This latch does not include the strike. If you are replacing an old latch, the existing strike will work. If you need the #PRE17780-11 90 degree stainless strike, Click Here.
A - 1-9/16"
B - 2-15/32"
C - 1-9/16"
D - 1/4"
E - 2-3/64" mounting holes on center
F - 25/32"
G - 3/16"
H - 1" mounting hole