1-1-2" Barbed Tee w- threaded leg

1-1-2" Barbed Tee w- threaded leg


Regular price$17.95
Shipping calculated at checkout.

  • Low stock - 9 items left
  • Inventory on the way
This 1-1/2” plastic barbed tee hose fitting sits on 2 legs and a white flange with a screen on the top leg.  The threads are 2.2 inches long, which permits it to be installed through decks up to 1-1/4" thick.  Most importantly, it was designed to fit a marine sanitation hose which has a slightly smaller ID than an industrial hose, so you won't need to heat the hose to get it on these barbs.  It is molded in high impact marine-grade nylon and pressure tested to over 75 lbs.  A 5° angle on the top leg helps assure maximum drainage and there is plenty of room on the barbs to double clamp the hose.

Made in the USA!
Need a different combination of barbs or threads?  Contact us and tell us what you need.  We can get almost any combination of barbs & threads from 5/8" to 1-1/2".

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Recently viewed