
1-1-2" Barbed Tee w- drain & screen
ME4144
- In stock, ready to ship
- Inventory on the way
This 1-1/2” barbed tee fitting sits on 2 legs and a white flange with a screen on the top leg. The threads are 2.2 inches long, which permits it to be installed through decks up to 1-1/2" thick. Most importantly, it was designed to fit a marine sanitation hose which has a slightly smaller ID than an industrial hose, so you won't need to heat the hose to get it on these barbs. It is molded in high impact marine-grade nylon and pressure tested to over 75 lbs. A 5° angle on the top leg helps assure maximum drainage and there is plenty of room on the barbs to double clamp the hose. Very flush flange installs in a 2" hole.
This Tee deck drain is frequently used by builders to link multiple decks drains.
Made in the USA!

This Tee deck drain is frequently used by builders to link multiple decks drains.
Made in the USA!

A - 2.85"
B - 2.00"
C - 1.5"
D - 1.5"
E - 4.575"
F - 1.7"
G - .55"
B - 2.00"
C - 1.5"
D - 1.5"
E - 4.575"
F - 1.7"
G - .55"
Need a different combination of barbs or threads? Just click Contact Us and tell us what you need. We can get almost any combination of barbs & threads from 5/8" to 1-1/2".