1-1/2" Barbed Tee w/ threaded leg

This Tee fitting has 1-1/2" hose barbs on 2 legs and 1-1/2" threads on the top leg.  The threads are 2.2 inches long, which permits it to be installed through decks up to 1-1/4" thick.  Most importantly, it was designed to fit marine sanitation hose which has a slightly smaller ID than industrial hose, so you won't need to heat the hose to get it on these barbs.  It is molded in high impact marine grade nylon and pressure tested to over 75 lbs.  A 5° angle on the top leg helps assure maximum drainage and there is plenty of room on the barbs to double clamp the hose.